MiniTech is a Tecnosicurezza electronic lock with master, manager, 58 users, time delay, 5,500 event audit, timelock and OTC. Suitable for complex commercial and banking use.
MiniTech has many configurable options, which are fixed once the lock has been set up. Safelock Systems has a standard specification which covers most applications. Should alternative settings be required, they can be specified on purchase, or discussed in greater detail. Any feature here listed as ‘available on request’ is an example of an alternative setting.
1 Master
1 Manager (ID 01)
48 Users (IDs 02-49)
10 Time delay override users (IDs 50-59)
Available on request
Time delay 1-99 minutes
Open window 1-19 minutes
5,500 events with real time and date
Access to the lock’s stored audit data requires Windows software and peripheral equipment. A basic audit can be viewed using the keypad, which shows lock opening, by which user and with time and date.
Silent alarm, available on request
Remote disable opening, or remote time delay override, available on request
Peripheral equipment is required to use the lock’s alarm interface features
Available on request
Time and timelock programmed from the keypad
Weekly opening and closing timelock
Holiday and special event dates – 30 closing periods, 30 opening periods
Immediate timelock
Automatic DST changes
Multi-lock: One MiniTech keypad can control up to 2 locks, available on request
Dynamic codes: With peripheral equipment and software, the lock can accept ‘One time codes’, available on request
Consecutive entry of 4 incorrect codes initiates a 5-minute penalty period
MiniTech is usually powered with a large battery box containing 6 x C-cell alkaline batteries. It can also be powered from an alarm system or using mains power with peripheral equipment
The standard motorbolt lock has a pull force of 30n. The bolt will drive to close after 8 seconds as standard (Configurable on request) but is sprung-loaded so will be held back by boltworks until the boltworks are released, when the bolt springs shut with a force of 4n.
A 30n pull and 30n push motorbolt is available on request and must be wired into door switches. Please contact us for more information.