After developing their own motorbolt lock over a year ago, Tecnosicurezza now also manufacture their own deadbolt, swingbolt and latchbolt lock bodies, so they have complete control over quality, stock and pricing.
The new locks have been on trial in Italy and Spain, and will gradually be introduced into our stock over the coming months.
Images
Model numbers
The models numbers shown on locks bodies have now changed per the tables below.
Bolt Type | Old Part | New Part |
---|---|---|
Swing | EM2020 | T4700 |
Dead | EM3520 | T4700/D |
Pulse (10 user) Previously known as Pulse Evo
Bolt Type | Old Part | New Part |
---|---|---|
Swing | EM2050 | T4710 |
Dead | EM3550 | T4710/D |
Bolt Type | Old Part | New Part |
---|---|---|
Swing | T4800 | T4801 |
Dead | T4800/D | T4801/D |
Motor | T4800/M | T4801/M |
Bolt Type | Old Part | New Part |
---|---|---|
Swing | T5200 | T5201 |
Dead | T5200/D | T5201/D |
Motor | T5200/M | T5201/M |
Bolt Type | Old Part | New Part |
---|---|---|
Swing | T5300 | T5301 |
Dead | T5300/D | T5301/D |
Motor | T5300/M | T5301/M |
Installation differences
Connectors
The new locks are fitted with flat white pico-SPOX connectors instead of square black molex connectors.
Where complete lock sets are supplied, the relevant cable will be included.
We carry a stock of various cable options for engineers replacing parts, please contact us for more information.
Ports
The port previously labelled as ENT, used to connect the keypad, is now 1
The port previously labelled as BAT, used to connect a battery box, is now 2
Deadbolt Installation
The keypad cable can no longer be routed through the deadbolt lock body. There is a large cut-out and the cable can be routed through one of the pillars.
There are slight variances to the bolt size and throw, please refer to the updated installation instructions.
Europrofile
There are slight (Less than 0.5mm) variances to the footprint, all lock bodies accord to Europrofile.
Installation Instructions
New installation instructions are shown on the relevant lock page on our main website and show installation for both old and new locks, also linked here:
Pulse Basic (2 user) + Pulse (10 User) Installation Instructions
Pulse Pro Installation Instructions
MiniTech Installation Instructions
TechMaster Installation Instructions
Certification
New lock bodies are certified to EN1300 Class B (Vds class 2), and can be found on the relevant lock page on our main website, also linked here:
Pulse Basic (2 user) + Pulse (10 user) Certificate
Operation
Operation remains the same for all locks.
Reset and setup
Due to the connector changes on the lock body, additional kit will be required to connect a reset box. This can be as simple as swapping out the cable in a reset box (Normally molex to molex ) to a molex to pico-SPOX connector. Alternatively, splitters and additional cables can be used to make a reset box setup with both connectors.
Setup software for Pulse (10 user) (Previously known as Pulse Evo) has changed. Software and procedures will be made available for engineers in due course.