Prior to taking an audit, ensure that the driver and audit software have been downloaded and installed on the computer. Instructions and software are available here.
What you’ll need
Audit equipment is available to purchase from our online store, the parts below are required.
Master or Manager code
Take audit
- Connect the molex plug of the Audit and setup cable to the USB interface
- Connect the USB interface to the computer
- Connect the jack plug of the Audit and setup cable to the port on the TechMaster
- Run the audit software, and ensure that the USB interface has been detected
- On the TechMaster, press any key to wake the display
- Press
or 
to access the main menu then enter the Mastercode or press 
to scroll to the Manager menu and enter the Manager code. - From either menu, press to scroll to PC LINK then or to confirm. The screen will display PC LINK… with the dots appearing from right to left
- On the audit software, click Download, then select TechMaster audit
- In the dialogue box that appears, specify the number of events to download (Max 6,000) and select any of the locks or the keypad.
- Click OK and wait for the audit to finish downloading. A message will show Operation done when the audit is complete.
- The software provides options for exporting the contents of the audit.